Tru CEREC® Guide 2 Kit v2

Reamer

Used to create an exact drill diameter size for (S) 4.5 and (M) 5.3 guide hole after the guide is milled out.

Tissue Punch

Used to remove tissue on a flapless surgery.

Drill Extension

Used to increase the length of drill shafts to access areas with limited interdental space.

Point Drill

Used to initially drill a hole and optimize stability and path for the next set of drills.

Taper Drill

Used on extraction sockets. Makes it easy to correct the path on immediate placement sites with side cutting tapered drill.

Twist Drill

The drills are used in sequence to the proper size and length of the path needed. There are 4 different lengths:

• Short (18mm)
• Medium (20mm)
• Long (22mm)
• Extra Long (25mm)

Sleeve

TruAbutment metal sleeves will fit the 5.3(M) size hole on the CG2 Guide making the internal diameter 4.5(S) size.

Sleeve Fitting Jig

Used to fit the metal sleeves onto the CG2 guide.

Twist Drill Selection

Enter D2 Value (18, 20, 22, or 25) as needed for your final drill from CG2 Kit (D2 = drill length). Your D1 value will always be your D2 minus implant length (F), minus sleeve height (E).