C-Warmer™ Dual : Anesthetic / Composite Warmer

C-Warmer Dual is an upgraded design of our C-Warmer series. With two heat sinks that can be set at different temperatures, the C-Warmer Dual reduces procedure times and improves overall efficiency. The C-Warmers are designed to enhance both the doctors' and patients' comforts. A thermostatically-controlled cartridge/composite warmer significantly reduces curing time with more flowability of composites and conveniently warms anesthetics and composites in one location. It also improves patient's comfort by delivering the restorations at body temperature with "less injection pain." Its user-friendly operation, compact size, and function will provide a significant impact on the everyday clinical routine.

Instructions

Press the power button for 1 sec. to turn on the warmer. To change temperature settings of the left heatsink, hold the ▲ button for 3 seconds until the temperature display blinks. Hold the ▼ button for 3 seconds to adjust the right. Adjust the temperature by 1°C by pressing '▲'/'▼'. After 5 seconds, the setting will be automatically saved. Then, wait for approx. 15 mins after setting the warmer at desired temperature. Recommended Temperature Setting

• Anesthetic : 37°C (98°F) (body temperature)
• Composite : 40°C ~ 45°C (104°F ~ 113°F)
• Has the ability to set two different temperatures for more efficient work
• Supports universal voltage from 100V to 240V
• Heats up to 40°C (104°F) in about 10~15 mins (Varies depending on environment)
• You can choose any 2 out of 5 options for slot configurations

Advantages

• Upgraded model of our C-Warmer Series
• Freely adjustable temperature with LED digital display between 30°C ~ 70°C (86°F ~ 158°F)
• All buttons located on top of the warmer
• Reduces microleakage
• Improves the flow capacities of composite
• Heaters are installed in the whole body of the warmer allowing heat to circulate and warm the composites thoroughly
• Maintains constant temperature for all day use with efficient power consumption
• It is safe to touch the warmer when heated because heat is not fully released outside the body

Type A - Anesthetics

• 2 Large Slots (15mm Diameter) - Can hold anesthetic syringes
• 8 Small Slots (9mm Diameter) - Can hold anesthetic cartridges

Type B - Compules

• 1 Large Slot (15mm Diameter) - Can hold Compule dispenser gun
• 4 Long Slots (7mm Diameter) - Can hold multiple Compules

Type C - Composites

• 1 Large Slot (14.5mm Diameter) - Can hold anesthetic syringe or Compule dispenser gun
• 6 Medium Slots (12mm Diameter) - Can hold Composite Resin

Type D - Larger Composites

• 4 Extra Large Slots (18.6mm Diameter) - Can hold Larger Composites (Compatible with 3M Composites)

Type E - Larger Composites and Flowable Resins

• 3 Large Slots (15mm Diameter) - Can hold Larger Composites (Compatible with 3M Composites)
• 4 Medium Slots (10mm Diameter) - Can hold Flowable Composite Resins

Cleaning Instructions

The device should be cleaned with a soft cloth with alcohol or ethyl alcohol and then with a dry cloth. Do not use solvent like thinner/benzene, which may damage the housing. Do not use ultrasonic sterilization, self-sterilization in home, dry sterilization, cresol, and infrared light. These methods can cause damage to the device.