CHEMASEAL

Application

The product is used for final obturation of the root canal as well as for sealing canals using posts.

Product Handling

Before placing the material, the canal must be properly prepared in accordance with the principles used in endodontic treatment (operating field protected with rubber dam, canal mechanically prepared, thoroughly flushed, disinfected and dried).

Prepare the paste immediately before application on a glass plate by introducing the powder in small portions to eugenol, carefully mixing and grinding to a paste consistency.

During mixing, a slight grittiness may be felt, which is caused by agglomeration of diodothymol and does not adversely affect the material quality.

The canal should be filled to the apical foramen, which must first be located.

When working with the product, use standard dental instruments.

― Mixing ratio 0.50 g powder/0.10 g eugenol, in practice this corresponds to: 3 level measuring spoons of powder to 2 drops of eugenol or multiples of this portion.

― Immediately after removing a portion of powder, the container must be tightly closed.

After paste preparation, proceed according to the chosen technique, namely: filling the canal with the material alone or sealing using posts.

A radiographic image of the treated tooth must be taken to control the filling (preferably before, during and after treatment).

Mode of Action

The product is manufactured in powder form, which before use must be mixed with EUGENOL intended for mixing ZnOE pastes to obtain an easily applicable paste. After placing the paste in the root canal, within a few to maximum 72 hours the material hardens forming a homogeneous solid mass. The material does not resorb and tightly fills the canal.

The product, due to its hydrocortisone acetate content, exhibits strong anti-inflammatory properties, and due to its diodothymol content, antiseptic properties, which persist until the material hardens.

With respect to setting time, layer thickness and solubility, the product complies with the requirements of PN-EN ISO 6876.

Storage Conditions

Store in a tightly closed container. Protect from moisture.

Store in a place inaccessible to children.

Store at a temperature below 25°C.

Protect from sunlight.

Any serious incident associated with the product must be reported to the manufacturer and to the appropriate authority (President of the Office for the Registration of Medicinal Products, Medical Devices and Biocidal Products).