Color-Marking 10m x Ø5mm, Dark Yellow | ErgoTape 5691Y

ErgoTape colour-marking tape for identifying instruments and handpieces. The 10 m roll is Ø5 mm, fully autoclavable and lasts up to 3× longer than regular tape, with a built-in cutter for easy use. Colour: Dark Yellow.

Reprocessing Instructions

Important: ErgoDenta instruments are supplied NON-STERILE and must be cleaned, disinfected, and sterilized before first use and after each subsequent use.

Step 1: Pre-Cleaning

Rinse under cold running water immediately after use. Remove visible debris with a soft brush. Keep instruments moist until processing.

Step 2: Automated Cleaning

Washer-disinfector: pre-rinse cold, enzymatic wash 55°C/10 min, thermal disinfect 90°C/5 min, dry.

Step 3: Inspect & Maintain

Check for residual soil, corrosion, or damage. Lubricate hinged instruments with medical-grade lubricant.

Step 4: Package

Place in ISO 11607-compliant sterilization pouches or wraps. Arrange to prevent tip contact. Seal properly.

Step 5: Sterilize

Autoclave at 134°C (273°F) for min. 18 minutes, pre-vacuum cycle. Validate with chemical and biological indicators.

Step 6: Store

Store in a clean, dry, enclosed area. Verify packaging integrity before use. Re-sterilize if compromised.