Luxating Elevator Gold, Straight, 3mm — Standard Handle 6001-2G

ErgoDenta ApS · #6001-2G

Automatically collected from ergodenta.dk

Are you the manufacturer?Send us your data

Luxating elevator, straight 3mm, gold-coated tip, on the standard handle. Cuts the periodontal ligament and gently expands the socket for atraumatic extraction. The ErgoDenta Luxating Elevator Gold (straight, 3mm) is a precision luxator on the standard handle. Unlike a conventional elevator, the fine, sharp blade severs the periodontal ligament and gently expands the alveolus, loosening the tooth with minimal force — an atraumatic technique that preserves the buccal plate and surrounding bone for implant placement. Working end: straight, 3mm. Handle: standard, ergonomic. Finish: gold-coated (TiN) for higher visual contrast and reduced friction. Part of the ErgoDenta Luxating Elevators Kit (8 pcs).

Reprocessing Instructions

Important: ErgoDenta instruments are supplied NON-STERILE and must be cleaned, disinfected, and sterilized before first use and after each subsequent use.

  • Step 1 Pre-Cleaning: Rinse under cold running water immediately after use. Remove visible debris with a soft brush. Keep instruments moist until processing.
  • Step 2 Automated Cleaning: Washer-disinfector: pre-rinse cold, enzymatic wash 55°C/10 min, thermal disinfect 90°C/5 min, dry.
  • Step 3 Inspect & Maintain: Check for residual soil, corrosion, or damage. Lubricate hinged instruments with medical-grade lubricant.
  • Step 4 Package: Place in ISO 11607-compliant sterilization pouches or wraps. Arrange to prevent tip contact. Seal properly.
  • Step 5 Sterilize: Autoclave at 134°C (273°F) for min. 18 minutes, pre-vacuum cycle. Validate with chemical and biological indicators.
  • Step 6 Store: Store in a clean, dry, enclosed area. Verify packaging integrity before use. Re-sterilize if compromised.

Product Information

ManufacturerErgoDenta ApS
BrandErgoDenta
Finishgold-coated (TiN)
HandleErgoSteel Standard
Quantity8
Working endstraight, 3 mm
SterilizationAutoclave at 134 °C (273 °F) for min. 18 minutes, pre-vacuum cycle