MANIFill Flow

The light-curing MANIFill Flow composites – easy handling thanks to the different types of viscosity. MANIFill Flow 55% filler content with low viscosity for direct, minimally invasive restorations.

Product Characteristics

• Easy and comfortable application
• No dripping – easy and highly accurate application
• Excellent physical properties
• Naturally aesthetic restorations
• Thixotropic behavior for precise placement

Indications

Light-curing, flowable composite with low viscosity for direct, minimally invasive restorations.

• Fissure sealing
• Class V fillings
• Minimally invasive Class I, II, and III fillings
• Correction of enamel defects
• Blocking out undercuts
• Minor shape and shade corrections on enamel

Preparation of the tooth surface

• Clean the tooth structure with a fluoride-free polishing paste.

Cavity preparation

• Preparation of the cavity according to the general rules of the adhesive technique.

Protection of deep cavities

• In the case of very deep cavities close to the pulp, cover the corresponding areas with a calcium hydroxide preparation

Matrix application for approximal defects

• For cavities with approximal parts, apply and fix a transparent matrix.

Etching and bonding

• Etch and bond according to the manufacturer's instructions

Application of the flow composite

• Apply Flow in thin layers (max. 2 mm) directly into the cavity, do not introduce any air bubbles when applying with the cannula.
• Cure each applied layer with a commercially available polymerization device for 40 seconds. During polymerization, a dispersion layer forms on the surface, which must not be touched or removed. It is used to connect the subsequent composite layers.
• ManiFill Flow can be finished and polished immediately after polymerization. Finishing diamonds, flexible discs, silicone polishers and polishing brushes are suitable for finishing. A light-curing unit with an emission spectrum of 350 – 500 nm should be used for polymerization.
• Store at 10 – 25 °C (50 – 77 °F). The material should have reached room temperature before use. Close the syringe tightly immediately after use.
• The maximum shelf life is printed on the label of the respective syringe. Do not use after the expiry date!
• Undesirable side effects of this medical device are extremely rare if processed and used properly.