MULTIDENTIN D

Material for temporary filling of tooth defects during treatment. Intended for closure of devitalizing inserts.

Before use, the material is mixed with water.

Handling instructions

1. Mix the material on a glass plate with purified water to a not-too-thick paste consistency; always introduce the powder into the water. Recommended ambient temperature during handling: 23°C ± 2°C. Recommended proportions: 2.8 g powder : 1 ml water. Mixing time: up to 60 s.
2. Introduce the prepared paste into the previously prepared and cleaned defect within the next 30 s, in which the material sets in the absence of saliva. Setting time, measured from the start of mixing, is 2 - 4.5 min. The thickness of the filling layer should not be less than 3 – 4 mm.

Mode of action

Material in powder form. When mixed with purified water in appropriate proportions, the material sets (reaction of zinc sulfate and zinc oxide and calcium sulfate with water) forming a uniform solid mass.

Storage conditions

Store in a dry place in a tightly closed container.

Keep out of reach of children.

Store at a temperature between 15°C and 25°C.