Polygon Over Post
OVERFIBERS SRL
Automatically collected from overfibers.com
Are you the manufacturer?Send us your data
Polygon Over Post
Zirconia Glass Fiber Post
Polygon Over Post are glass fiber posts with non-circular section. As Overfibers post surfaces are particularly rough the silanization treatments are an optional.
Clinical Directions
Polygon Over Post are the first glass fiber posts with non-circular section present on the market. This characteristic, made possible by particular processing systems, which are part of the advanced Overfibers Know How. They respects the morphology of the majority of the canals of single root teeth, adapting itself to the internal anatomy of the tooth canal (see photos A and B) with minimal removal of dental matter and maximum resistant section of the post. They are recommended for very stressed teeth, such as abutments of extended fixed prostheses or in partially removable combined prosthetic anchor teeth (removable prostheses). Particularly recommended for single root premolars, canine teeth and incisors.
In non-circular and oval canals, compared to the common circular section (A), the Polygon Over Post offers a resistant section which is almost double (B). Note how the diameter Ø is the same in the two posts. A: Standard posts with circular section overlapped at the root canal entrance of a lower premolar; B: Polygon Over Posts with non-circular section overlapping the same tooth: the resistant section (light blue area) is almost double that of the previous one, and is capable of bringing a much higher level of resistance to the restoration.
Features
Advantages
- Highly retentive surface: Increases the post / cement adhesion without weakening it with deep grooves
- 80% glass fiber with zirconia: high flexure strength 1500 MPa
- Balanced flexure E-modulus: 60 GPa to better stabilize the restoration
- Translucent: to accelerate the activation of dual cements
- Radiopacity: 3.0 mm or 300% Al equivalent
- Fatigue Strength: 5 Millions Cycles Without Breaking
- Sterilization in autoclave: 135°C at 2.1 bar for 5 min without any variation of their resistance
- Non-circular section: 49% more resistant than teeth restored with standard circular ones
Polygon Over Post and Polygon Drill are available in three sizes, with color coding for a corresponding use.
Product Information
| Manufacturer | OVERFIBERS SRL |
|---|---|
| Color | PYOP01, PYOP02, PYOP03 |
| Length | 19 mm |
| Surface | Highly retentive, silanization treatment optional |
| Material | Fibra de vidrio de circonia |
| Elastic modulus | 60 GPa |
| Composition | 80% glass fiber with zirconia |
| Radiopacity | 3.0 mm or 300% Al equivalent |
| Composition | 80% fibra di vetro con zirconia |
| Total length | 19 mm |
| Sterilization | 135°C at 2.1 bar for 5 min |
Documents
- Polygon Over Post Document
Documents for the product line
- Polygon Drill (Drills EN IFU Rev 10 0125 3) Instructions for use
- Polygon Over Post (MSDS Over Post Over Post eng) Safety data sheet
- Polygon Drill (MSDS Drill eng) Safety data sheet
- Over Post (Brochure Over Post eng) Brochure
- Fiber Post Removal: Comparative Study Using a New … Maria, Santa Maria, Brazil Document
- Effect of Sterilization on Fiber Posts Fracture … of Bologna, Bologna, Italy Document
- Microtensile bond strength of fiber post: effect … of Santa Maria, Brazil2 Document
- Fiber Post Bonding Using Self-Etching and Resin Cements Document
and 16 more