Root Canal Stopper 0.6mm 11429
ErgoDenta ApS · #11429
Automatically collected from ergodenta.dk
Are you the manufacturer?Send us your data
Root Canal Stopper 0.6mm endodontic measuring stopper for setting working length. The Root Canal Stopper 0.6mm establishes and checks endodontic working length, holding file stops at the measured length.
- Sets and verifies working length
- Clear, autoclavable measuring surface
- Reusable chairside aid
Reprocessing Instructions
Important: ErgoDenta instruments are supplied NON-STERILE and must be cleaned, disinfected, and sterilized before first use and after each subsequent use. Step 1 Pre-Cleaning: Rinse under cold running water immediately after use. Remove visible debris with a soft brush. Keep instruments moist until processing. Step 2 Automated Cleaning: Washer-disinfector: pre-rinse cold, enzymatic wash 55°C/10 min, thermal disinfect 90°C/5 min, dry. Step 3 Inspect & Maintain: Check for residual soil, corrosion, or damage. Lubricate hinged instruments with medical-grade lubricant. Step 4 Package: Place in ISO 11607-compliant sterilization pouches or wraps. Arrange to prevent tip contact. Seal properly. Step 5 Sterilize: Autoclave at 134°C (273°F) for min. 18 minutes, pre-vacuum cycle. Validate with chemical and biological indicators. Step 6 Store: Store in a clean, dry, enclosed area. Verify packaging integrity before use. Re-sterilize if compromised.
Product Information
| Manufacturer | ErgoDenta ApS |
|---|---|
| Type | Endo measuring stopper / ruler |
| Sterilization | Fully autoclavable |