Root Canal Stopper 1.2mm 11432
ErgoDenta ApS · #11432
Automatically collected from ergodenta.dk
Are you the manufacturer?Send us your data
Root Canal Stopper 1.2mm endodontic measuring stopper for setting working length. The Root Canal Stopper (1.2 mm) is a silicone stop used to mark working length on endodontic files and reamers, keeping your reference point accurate throughout instrumentation.
- Marks and maintains working length reliably
- 1.2 mm bore fits standard endodontic files
- Autoclavable silicone, available across the endo range The Root Canal Stopper 1.2mm establishes and checks endodontic working length, holding file stops at the measured length.
- Sets and verifies working length
- Clear, autoclavable measuring surface
- Reusable chairside aid
Reprocessing Instructions
Important: ErgoDenta instruments are supplied NON-STERILE and must be cleaned, disinfected, and sterilized before first use and after each subsequent use. Step 1 Pre-Cleaning: Rinse under cold running water immediately after use. Remove visible debris with a soft brush. Keep instruments moist until processing. Step 2 Automated Cleaning: Washer-disinfector: pre-rinse cold, enzymatic wash 55°C/10 min, thermal disinfect 90°C/5 min, dry. Step 3 Inspect & Maintain: Check for residual soil, corrosion, or damage. Lubricate hinged instruments with medical-grade lubricant. Step 4 Package: Place in ISO 11607-compliant sterilization pouches or wraps. Arrange to prevent tip contact. Seal properly. Step 5 Sterilize: Autoclave at 134°C (273°F) for min. 18 minutes, pre-vacuum cycle. Validate with chemical and biological indicators. Step 6 Store: Store in a clean, dry, enclosed area. Verify packaging integrity before use. Re-sterilize if compromised.
Product Information
| Manufacturer | ErgoDenta ApS |
|---|---|
| Type | Endo measuring stopper / ruler |
| Sterilization | Fully autoclavable |