Sickle Scaler 204S (A) | ErgoTip 356T
ErgoDenta ApS · #356T
Automatically collected from ergodenta.dk
Are you the manufacturer?Send us your data
Sickle Scaler 204S (A) ErgoTip interchangeable scaler tip for ErgoTip handles. The Sickle Scaler 204S (A) ErgoTip is an interchangeable screw-in sickle scaler tip for the ErgoTip system — the working end only, designed to thread into any ErgoTip cone-socket handle for removing supragingival calculus.
- Use · Replace · Repeat — swap only the worn tip and keep the handle you like
- For removing supragingival calculus
- Fully autoclavable; fits any ErgoTip handle (ErgoX® / ErgoX® Plus / ErgoSteel) This tip threads into any ErgoTip cone-socket handle — pick your handle once and reuse it across all your tips.
Reprocessing Instructions
Important: ErgoDenta instruments are supplied NON-STERILE and must be cleaned, disinfected, and sterilized before first use and after each subsequent use. Step 1 Pre-Cleaning: Rinse under cold running water immediately after use. Remove visible debris with a soft brush. Keep instruments moist until processing. Step 2 Automated Cleaning: Washer-disinfector: pre-rinse cold, enzymatic wash 55°C/10 min, thermal disinfect 90°C/5 min, dry. Step 3 Inspect & Maintain: Check for residual soil, corrosion, or damage. Lubricate hinged instruments with medical-grade lubricant. Step 4 Package: Place in ISO 11607-compliant sterilization pouches or wraps. Arrange to prevent tip contact. Seal properly. Step 5 Sterilize: Autoclave at 134°C (273°F) for min. 18 minutes, pre-vacuum cycle. Validate with chemical and biological indicators. Step 6 Store: Store in a clean, dry, enclosed area. Verify packaging integrity before use. Re-sterilize if compromised.
Product Information
| Manufacturer | ErgoDenta ApS |
|---|---|
| Type | ErgoTip interchangeable tip (working end only) |
| Brand | ErgoTip |
| Sterilization | Fully autoclavable |