TYTAN

KILNS FOR BURNOUT

Series of kilns with microprocessor controllers. Modern, energy-efficient devices for precise burnout of casting moulds.

TYTAN ECO

TYTAN ECO is a compact kiln designed for the implementation of all burnout processes. A proposal for laboratories looking for an inexpensive but efficient kiln.

FOR SPEED MASSES The ECO controller works perfectly for the burnout of rings made from "speed" type masses

SMART CONTROLLER Easy-to-use ECO controller, ideal for processes that do not require a large number of cycles.

TYTAN MAX

TYTAN MAX has an advanced programmer with the ability to perform the most demanding burnout processes for rings with wax models and 3D printing resins.

IDEAL PRECISION Microprocessor programmers enable the implementation of one to three cycles with an accuracy of 1 °C.

PROCESS CONTROL 30 programs and a clear display for achieving perfect results.

PROCESS RESET In the event of a power outage, the kiln continues burnout when voltage is restored.

ALWAYS ON TIME The microprocessor programmer is equipped with a daily timer with a delay of up to 99 hours.

TECHNOLOGY

FULL CERAMIC CHAMBER

The chamber module is hard and uniform because it is formed by moulding ceramic under high pressure. It protects the heating coils from mechanical damage and the effects of aggressive gases, which increases their durability.

The chamber door and chamber entrance are particularly at risk of damage resulting from the operation of tongs and rings. Strong ceramic effectively protects them from damage.

IN 60 MIN TO 1000° C

The heating elements of the kiln allow it to heat up to 1000 °C in 60 minutes.

4D HEATING

The heating coil on 4 walls of the muffle guarantees ideal burnout of rings regardless of their size or placement in the chamber.

OPTIMAL CAPACITY

The chamber holds from 4 rings of size "9" (moulds for skeletal prostheses) to 8 rings of size "6".

FLUE GAS EXTRACTION

The ceramic chimney allows free discharge of flue gases to the extraction.

SAFETY

100% STAINLESS STEEL

Due to the high temperature and the gases produced during the burnout process, the entire kiln housing of TYTAN kilns is made of stainless steel, which is resistant to aggressive substances and temperature.

The high quality of the housing elements significantly increases the service life of the device.

PROTECTS HANDS

The side door opening system of the kiln protects the user from the effects of high temperature.

CURRENT SAFETY SWITCH

The safety switch disconnects the power supply when the chamber is opened and protects the kiln from overheating.

DOOR LOCK

A magnet keeps the door closed regardless of the degree of housing heating.

CHAMBER PROTECTION

A ceramic pad protects the chamber floor from the action of melted substances.

OPERATION

QUARTZ THERMOCOUPLE PROTECTION

The temperature sensor is housed in a quartz sleeve, which protects it from mechanical damage and the effects of aggressive substances from the burnout rings.

The quartz sleeve has no thermal inertia (like ceramic sleeves) and is not subject to corrosion (like metal sleeves), so temperature measurement is maximally precise.

READY TO WORK

Before shipment to the customer, each kiln is calibrated and "burned out". This means it is 100% tested.

PROCESS VISUALIZATION

Acoustic and optical temperature signalling allows comprehensive control of the burnout process.

WHY TYTAN?

• COMPLETE MUFFLE FROM FULL CERAMIC
• HOUSING FROM STAINLESS STEEL
• THERMOCOUPLE IN QUARTZ PROTECTION
• CONTINUATION OF WORK AFTER VOLTAGE DROP
• HIGH ACCURACY OF TEMPERATURE MEASUREMENT
• UNIFORM TEMPERATURE IN THE CHAMBER

ROKO SERVICE

As a genuine manufacturer, we are able to offer our customers the highest standard of service, a standard that only a manufacturer can provide.

24H SERVICE ROKO's technical facilities enable repair of our products within 24 hours of their receipt for service. If repair is not possible within this timeframe, we provide a replacement device.

3 YEARS WARRANTY All active components in our products have increased durability, so you can enjoy a 3-year warranty with no hour limit, with the option to extend to up to 5 years.

LOW SERVICE COSTS As a manufacturer, we do not limit ourselves to replacing components but have the ability to repair them, which means service costs are exceptionally low. In the event of failure, we guarantee delivery of a replacement device during the service period.

SPARE PARTS AVAILABLE As a manufacturer, we have a complete range of spare parts, you don't have to wait weeks for their delivery from the other side of the world. Technical consultants are available to customers and their knowledge ensures the solution of all problems.