Camlog
478 Products
Page 7 of 10
Camlog
Drill extension ISO shaft for drills with internal irrigation, L 26.6 J5002.0005
Camlog
Drill extension ISO shaft, L 26.5 J5002.0006
Camlog
Gingiva height indicator, straight J3550.xx00
Camlog
Guide System Gingiva punches, SCREW-LINE J5041.xxx3
Camlog
Guide System Guiding sleeve, SCREW-LINE, H 3.0 (2 units) J3734.xxxx
Camlog
Guide System Pilot drill, SCREW-LINE, L 16 J5064.xxxx
Camlog
Handle for Implant analog J3025.00xx
Camlog
iSy® Cover cap, Ø 3.2 (3 units) P2015.0006
Camlog
iSy® Single patient form drill (3 units) P5040.xxxx
Camlog
iSy® Tap, L 32 P5054.xxxx
Camlog
Locator® Instrument, 3-part J2253.0002
Camlog
Locator® Lab kit, for extended range (2 units) J2253.0112
Camlog
Locator R-Tx® retention insert (4 units)
Camlog
Manual screwdriver, hex, L 23 J5317.0511
Camlog
ODSecure® Assortment Kit (2 units) BZ2273.0102
Camlog
ODSecure® Cap extractor tool BZ2273.0002
Camlog
Osteotome SCREW-LINE, angled-convex J5418.xx10
Camlog
Osteotome SCREW-LINE, straight convex J5418.xx00
Camlog
Osteotomy set CAMLOG® / CONELOG® SCREW-LINE, angled concave J5420.0030
Camlog
Pilot drill without coil, Ø 2.0 J5051.2003
Camlog
Pilot drill with reduced coil, Ø 2.0 J5051.2000
Camlog
Polishing protection for caps and bases for bar abutment J3021.xx00
Camlog
Pre-drill SCREW-LINE, Ø 1.7-2.8 J5051.2800
Camlog
Reworking reamer, base for bar abutment, Ø 3.3 / 3.8 / 4.3 J3711.0010
Camlog
Reworking reamer, base for bar abutment, screw seat, Ø 3.3 / 3.8 / 4.3 J3711.0020
Camlog
Tube for CT-planning for drill, Ø 2.0 (10 units) A2002.2000
Camlog
Tube for CT-planning for drill, Ø 2.2 (10 units) A2222.2200
Camlog
Universal holder, incl. 2 CAMLOG® Lab screws, hex, and 1 CAMLOG® Abutment collet each J3709.0010
Camlog
Ball abutment analog C3015.xxxx
Camlog
Bite registration cap, sterile (6 units) J2112.xx10
Camlog
CAMLOG® Abutment collets for universal holder J3709.xx00
Camlog
CAMLOG® Selection abutment kit K8011.1000
Camlog
CeraOss Bone substitute from bovine spongiosa in granulate form, Particle size 0.5 - 1.0 mm
Camlog
CeraOss Bone substitute from bovine spongiosa in granulate form, Particle size 1.0 - 2.0 mm
Camlog
CM Dalbo®-Plus matrix J2250.0005
Camlog
CONELOG® SCREW-LINE implant for practice Ø 4.3, L 13 (10 units) C1069.4313-01
Camlog
CONELOG® Universal holder set C3709.0010
Camlog
Countersink J5006.xxxx
Camlog
Dense bone drill 2 PROGRESSIVE-LINE J5072.xx02
Camlog
Dense bone drill PROGRESSIVE-LINE J5072.xx00
Camlog
Depth stop PROGRESSIVE-LINE and SCREW-LINE for form drills with reduced coil J5015.xx00
Camlog
Drill for placement of corrugated CT-tubes A2050.xxxx
Camlog
Drill PROGRESSIVE-LINE Flex J5079.xxxx
Camlog
Driver for ball abutment, manual / wrench J5300.0011
Camlog
Driver for Locator® abutment, manual / wrench J2253.0001
Camlog
Driver for screw implants, manual / wrench J5300.003x
Camlog