25° Angled Clicq™-Pression Transfer Abutment compatible with MegaGen® AnyRidge® Ø3.5 - Ø8.0 Morse Tapper (Cone length 6 mm, Height H 3 mm)
Edison Medical compatible con MegaGen AnyRidge · #TAP-AR-RP2530
Recopilado automáticamente de edisonmed.com
¿Es usted el fabricante?Aportar datos
Texto del fabricante en Englisch
25° Angled Clicq™-Pression Transfer Abutment compatible with MegaGen®
- Fits with: MegaGen® - AnyRidge® Ø3.5 - Ø8.0 Morse Tapper
- Platforms: RP
- Material: Titanium (Ti-6AL-4V-ELI)
- Recommended Torque Tightening: 20 NCM for Temporary | 30 NCM for Permanent
- Required Screwdriver: 0.48" | 1.2mm Hex
Main Advantages
- Dual Purpose - Could be used as a final abutment
- Enables taking a more accurate impression
- Enables taking a full arch / mouth impression
- Titanium Nitride (TiN) coating finish
- Cost Effective – can be reused several times
- Time efficient
Related Products
- Snap-On plastic transfer is included
- Peek healing cap can be purchased separately
- Abutment lab analog can be purchased separately
- Castable waxing sleeves can be purchased separately
Su selección 25° Angled Clicq™-Pression Transfer Abutment compatible with MegaGen® AnyRidge® Ø3.5 - Ø8.0 Morse Tapper (Cone length 6 mm, Height H 3 mm)
Información del producto
| Fabricante | Edison Medical |
|---|---|
| Winkel | 25° |
| Höhe | H 3 mm |
| Drehmoment | 20 Ncm |
| Material | Titanium (Ti-6AL-4V-ELI) |
| Plattform | RP |
| Passend zu | MegaGen® - AnyRidge® Ø3.5 - Ø8.0 Morse Tapper |
| Verbindung | Oxy Implant® - PSK Micro Ø3.5 - Ø5.0 CC RP |
| Konuslänge | 6 mm |
| Benötigter Schraubendreher | 0.48" | 1,2mm Hex |
| Kompatibles Implantatsystem | MegaGen® AnyRidge® |
| Kompatible Implantatplattform | Ø3.5 - Ø8.0 Morse Tapper (Cone length 6 mm, Height H 3 mm) |
| Empfohlenes Anzugsdrehmoment | 20 NCM for Temporary | 30 NCM for Permanent |