Condenser, Drop-Shaped, 1.3mm-1.8mm | ErgoSlip 10651

ErgoDenta ApS · #10651

Collecté automatiquement depuis ergodenta.dk

Vous êtes le fabricant ?Transmettez vos données

Texte du fabricant en anglais

Condenser, Drop-Shaped, 1.3mm-1.8mm dental condenser for packing and condensing restorative material. The Condenser, Drop-Shaped, 1.3mm-1.8mm is a dental condenser (plugger) for packing and condensing restorative material into the prepared cavity for a dense, void-free fill.

  • Packs and condenses amalgam or composite firmly
  • Smooth/serrated working end for dense adaptation
  • Tip size 1.3mm

Reprocessing Instructions

Important: ErgoDenta instruments are supplied NON-STERILE and must be cleaned, disinfected, and sterilized before first use and after each subsequent use. Step 1 Pre-Cleaning: Rinse under cold running water immediately after use. Remove visible debris with a soft brush. Keep instruments moist until processing. Step 2 Automated Cleaning: Washer-disinfector: pre-rinse cold, enzymatic wash 55°C/10 min, thermal disinfect 90°C/5 min, dry. Step 3 Inspect & Maintain: Check for residual soil, corrosion, or damage. Lubricate hinged instruments with medical-grade lubricant. Step 4 Package: Place in ISO 11607-compliant sterilization pouches or wraps. Arrange to prevent tip contact. Seal properly. Step 5 Sterilize: Autoclave at 134°C (273°F) for min. 18 minutes, pre-vacuum cycle. Validate with chemical and biological indicators. Step 6 Store: Store in a clean, dry, enclosed area. Verify packaging integrity before use. Re-sterilize if compromised.

Informations produit

FabricantErgoDenta ApS
Taille1.3mm-1.8mm
TypeEn forme de goutte
ManchesXP, X, SP, SS, S
StérilisationEntièrement autoclavable
Options de mancheErgoX® · ErgoX® Plus · ErgoSteel SP