Dental Models Materials 3D3

Dental Models Materials

3D3 dental model material is a biocompatible material offering high-precision and high-accuracy models with a smooth surface finish. It can be used by laser, DLP and LCD based on 3D printers utilizing 405nm wavelength.

Application Areas

• Diagnostic models
• Implant models
• Orthodontic models
• Crown & bridge models

Product Overview

Features

• Heat resistant
• High stability
• High resolution
• Repeatability

Material Properties

[Material properties table shown in image]

Application

• Shake well before pouring from the bottle into the 3D printer resin tank.
• Before printing, determine printing parameter according to the printer being used.
• After printing, rinse the printed object with 95% isopropyl alcohol to remove excess resin on the surface. Ultrasonic bath is recommended for thorough cleaning (duration: 5mins).
• After cleaning, dry the printed object with air blower or paper towel, then proceed with post-curing of the object. Adjust the light curing intensity and duration according to the post-curing system being used.

Precautions

• Keep the room well-ventilated.
• Wear all necessary PPE while handling the material, including goggles, nitril gloves and protective clothing.
• Gloves should be discarded and replaced immediately if there is any indication of degradation.
• Always clean the build platform and resin tray after use.
• Avoid recycling of used material as it may affect the next printing cycle.
• Avoid using the 3D3 Dental model material for other appliances.
• The product was developed and produced in compliance with the ISO 13485:2016 Standard.