Modelstar S Powder

Modelstar S Powder

Modelstar S Powder is based on the Modelstar S partial denture alloy. This guarantees the successful production of dentures with a well-proven dental material.

• Compliant with DIN EN ISO 5832-4 and ASTM F75

Modelstar S Powder 16

• Grain size of the powder: 0-16µm
• Suitable for processing in the systems: PXS Dental* and PXM Dental*, DMP Dental 100* and ProX DMP 200*

Modelstar S Powder 65

• Grain size of the powder: <65µm
• Suitable for processing in the systems: On request

Composition in percent by mass:

• Co: 61.5%
• Cr: 28.5%
• Mo: 6%
• C,Fe,Mn,Si: <1%

Technical properties**:

• Proof stress (Rp 0.2): 560MPa
• Ultimate tensile strength: 960MPa
• Elongation: 20%
• Vickers hardness: 340 HV 10
• Density: 8.4g/cm³
• Melting range: 1490-1540°C
• Laser weldable: Yes
• Type (DIN EN ISO 22674): 5

Trade unit:

Modelstar S Powder 16: 5000g Modelstar S Powder 65: 5000g

*PXS Dental and PXM Dental are registered trademarks of the company PHENIX Systems // *DMP Dental 100 and ProX DMP 200 Dental are registered trademarks of 3D Systems Corp. ** Standard values; dependent on specific machine settings