printROCK gold 1kg 28104010

Light-curing resin for the high-precision production of gear crowns using 3D printing technology. Scannable.

• Very similar to plaster in further processing
• Milling/drilling without smearing or splintering
• printROCK® is free of BPA and TPO. Contents: 1000 g *** Important processing instructions ⦁ Resin processing temperature > 20°C ⦁ Shake bottle well before use! (After prolonged storage, at least 3 minutes) (Do not use hard or sharp-edged objects for stirring!) After printing, wash the print object(s) for 10 minutes with 99.9% isopropanol. A water-based alternative is the saremco print CLEANING CONCENTRATE (item no. Please refer to the instructions for use. After washing, rinse the print object(s) with water. • Dry the printed object(s) thoroughly (e.g., with compressed air) • Post-cure the printed object(s): - e.g., in Anycubic Wash&Cure 3 (40 watts): 20 minutes - or Phrozen Cure V2 (60 watts): 10 minutes • Roughly remove supports with a diamond cutting disc for plaster, trim the model to remove any remaining support material.