priti®perfect

priti®perfect stands for: Shade stability from model to mouth. Control your results perfectly with brush application and ready-to-use paste materials. The final colors are already evident during application. With only 20 components in the priti®perfect set, it is possible to achieve perfect results in just 1 firing. Depending on the case, the 2 firing solution or internal staining can also be selected.

priti®perfect pink

5 structure pastes and 3 stains for pink esthetics.

APPROVED FOR:

• Zirconium dioxide
• Zirconia layered ceramics
• Metal layered ceramics
• Lithium disilicate

Condition the surface

Finish the restoration as usual Sandblast Clean the surfaces with a steam cleaner Apply glaze to whole surface, ensuring there is no pooling Note: The liquid is only for wetting/cleaning the brush or diluting pastes. It does not create any gloss! Tip: If liquid has settled in the container, the paste must be stirred thoroughly with a non-metallic instrument.

B - SELECT PROCEDURE

You can find more information on the procedures in the brochure. Choose from two options: a) Place the restoration in the furnace immediately. If necessary, finish and polish after firing. b) When using structural pastes:

• Keep briefly in ceramic furnace at 300 °C
• Dry for 10 seconds
• Finish surface with brush
• Start firing program

D - FIRING

The temperatures and times given in the table are only for guidance. Each furnace is different, so the parameters need to be adjusted according to the desired level of surface gloss. The rate of temperature rise, the final temperature, and the hold time must be adjusted for larger restorations.