Sickle Scaler M23 (B) | ErgoTip 361T
ErgoDenta ApS · #361T
Collecté automatiquement depuis ergodenta.dk
Vous êtes le fabricant ?Transmettez vos données
Texte du fabricant en anglais
Sickle Scaler M23 (B) ErgoTip
Sickle Scaler M23 (B) ErgoTip interchangeable scaler tip for ErgoTip handles. The Sickle Scaler M23 (B) ErgoTip is an interchangeable screw-in sickle scaler tip for the ErgoTip system — the working end only, designed to thread into any ErgoTip cone-socket handle for removing supragingival calculus.
- Use · Replace · Repeat — swap only the worn tip and keep the handle you like
- For removing supragingival calculus
- Fully autoclavable; fits any ErgoTip handle (ErgoX® / ErgoX® Plus / ErgoSteel)
Reprocessing Instructions
Important: ErgoDenta instruments are supplied NON-STERILE and must be cleaned, disinfected, and sterilized before first use and after each subsequent use. Step 1 Pre-Cleaning: Rinse under cold running water immediately after use. Remove visible debris with a soft brush. Keep instruments moist until processing. Step 2 Automated Cleaning: Washer-disinfector: pre-rinse cold, enzymatic wash 55°C/10 min, thermal disinfect 90°C/5 min, dry. Step 3 Inspect & Maintain: Check for residual soil, corrosion, or damage. Lubricate hinged instruments with medical-grade lubricant. Step 4 Package: Place in ISO 11607-compliant sterilization pouches or wraps. Arrange to prevent tip contact. Seal properly. Step 5 Sterilize: Autoclave at 134°C (273°F) for min. 18 minutes, pre-vacuum cycle. Validate with chemical and biological indicators. Step 6 Store: Store in a clean, dry, enclosed area. Verify packaging integrity before use. Re-sterilize if compromised.
Informations produit
| Fabricant | ErgoDenta ApS |
|---|---|
| Type | ErgoTip interchangeable tip (working end only) |
| Marque | ErgoTip |
| Stérilisation | Entièrement autoclavable |