Step Bending Pliers, 1.0mm 4714

ErgoDenta ApS · #4714

Collecté automatiquement depuis ergodenta.dk

Vous êtes le fabricant ?Transmettez vos données

Texte du fabricant en anglais

Step Bending Pliers, 1.0mm

Step Bending Pliers, 1.0mm orthodontic plier for bending and forming wires. The Step Bending Pliers, 1.0mm is an orthodontic plier for bending, forming and adjusting wires and appliances.

  • Precision tips for accurate wire bends and loops
  • Hardened working surfaces for durability
  • Reusable and fully autoclavable

Reprocessing Instructions

Important: ErgoDenta instruments are supplied NON-STERILE and must be cleaned, disinfected, and sterilized before first use and after each subsequent use. Step 1 Pre-Cleaning: Rinse under cold running water immediately after use. Remove visible debris with a soft brush. Keep instruments moist until processing. Step 2 Automated Cleaning: Washer-disinfector: pre-rinse cold, enzymatic wash 55°C/10 min, thermal disinfect 90°C/5 min, dry. Step 3 Inspect & Maintain: Check for residual soil, corrosion, or damage. Lubricate hinged instruments with medical-grade lubricant. Step 4 Package: Place in ISO 11607-compliant sterilization pouches or wraps. Arrange to prevent tip contact. Seal properly. Step 5 Sterilize: Autoclave at 134°C (273°F) for min. 18 minutes, pre-vacuum cycle. Validate with chemical and biological indicators. Step 6 Store: Store in a clean, dry, enclosed area. Verify packaging integrity before use. Re-sterilize if compromised.

Informations produit

FabricantErgoDenta ApS
TypeOrthodontic plier
StérilisationEntièrement autoclavable