SYSTEM NE
Adentatec
Collecté automatiquement depuis adentatec.com
Vous êtes le fabricant ?Transmettez vos données
Texte du fabricant en anglais
SYSTEM NE
SYSTEM NE is a non-precious dental cast alloy for crowns and bridges on cobalt-base, type 4.
SYSTEM NE is easy to use and quick to polish with excellent laser welding properties.
The alloy can be melted by open flame or induction heating.
SYSTEM NE can be used with any commercial, phosphate-bonded investment material (our recommendation: ADENTA®-VEST CB).
SYSTEM NE can be veneered with any high-fusing ceramics.
Typical material properties
| Property | Value |
|---|---|
| Yield strength 0,2 % (MPa) | 500 |
| Elongation (%) | 9,0 |
| E-module (GPa) | 210 |
| Tensile strength (MPa) | 720 |
| Density (g/cm³) | 8,4 |
| CTE (25 – 500°C) (10⁻⁶ K⁻¹) | ~ 14,2 |
| Hardness HV 10/30 | 300 |
| Delivery form (mm) | Ø 9,5 x 11 |
| Packaging unit (g) | 1000 |
| Type acc. DIN EN ISO 22674 | Type 4 as delivered |
Lot numbers may show minimum deviation from typical values. More information are available on our instruction for use.
Chemical composition %
| Element | % |
|---|---|
| Co | 64,4 |
| Cr | 21 |
| Mo | 6,5 |
| W | 6,4 |
| Si | 0,8 |
| Mn | 0,65 |
| Fe | 0,1 |
Free of Be, Cd and Pb. Ni < 0,1%
Informations produit
| Fabricant | Adentatec |
|---|---|
| Densité | 8,4 g/cm³ |
| Sans plomb | Oui |
| Type d'alliage | Cobalt-base, type 4 |
| Application | Couronnes et bridges |
| Forme de livraison | Ø 9,5 × 11 mm |
| Résistance à la traction | 720 MPa |
| Sans béryllium | Oui |
| Elasticity Modulus | 210 GPa |
| Unité d'emballage | 1000 g |